Fie că este vorba despre sarma sudură plina sau cu miez flux, baghete Tig sau sarma sub arc și pulberi și sau aliaje de lipire sau chiar sarma pentru pulverizare termică, ați ajuns la locul potrivit. Cu nu mai puțin de 2.000 de tone de stoc și peste 500 de aliaje diferite, suntem gata să vă servim.

Certilas urmărește îmbunătățirea calității în fiecare zi cu ajutorul CEWELD® produse, cu cea mai modernă unitate de fabricație din întreaga lume CEWELD®
Oferim o mare varietate de sudare, lipire și pulverizare de metal consumabile, inclusiv facilităţi de testare foarte moderne, un modern depozit automat, înregistrarea lotului cu trasabilitate completă și capacitatea de a livra toate metalele de adaos cu un certifica de calitate. Conform EN 10204.
Toate consumabilele noastre în totalitate respectă EN ISO și AWS standardele.

Verificati catalog produse in Tab-ul Specificatii

1. METAL CORED WIRE FOR NON-ALLOYED AND FINE GRAIN STEEL

CEWELD AA M400	9606–1: FM1 Sect IX QW–432: F-No. 6	T 500-640 MPa Y > 420 MPa	C Mn	< 0,08 -1.,3	AA M400 is a seamless metal cored wire for high productivity welding, offering excel- lent properties for both short- and spray arc range. Excellent arc re-start even with cold
	17632–A: T424 M M211 H5 A 5.18:	E>24% I -70J(-40°C)	Si p s	– 0,5 <0,015 <0,015	wire tip, particularly well-suited for robotic applications with high deposition efficiency. Excellent gap bridging during root welding. Wide range of voltage setting from 14 to 32 Volts. Excellent Impact values. CTOD tested to -20 °C. Low hydrogen content
	E 70C-6M H4				HD<3 ml/1 00g even after long storage.
	A5.36:
	E71T15-M21A8-CS1-H4
CEWELD	9606–1: FM1	T 550-680 MPa	C	< 0,05	AA M460 is a seamless metal cored wire with remarkable stable arc and no spatters.
AA M460	Sect IX QW–432: F-No. 6	Y > 460 MPa	Mn	– 1,5	Excellent for use in automated welding applications such as orbital Mag or robotic
	17632–A: T46 6 M M211 H5 A 5.18:	E>24% I -70J(-60°C)	Si p s	– 0,7 <0,015 <0,015	welding. This wire offers a unique approval class at most third parties that enables you to use only one wire to cover more procedures up to 460MPa yield strength steels. AA M460 can also be used for constructions that needs post weld heat treatment after
	E 70C-6M H4				welding and still offers mechanical properties confirming 5Y46 class. Low hydrogen
	A5.36:				content HD<3 ml/100g even after long storage. CTOD tested at –20 °C.
	E81T15-M21A8-CS1-H4
CEWELD	9606–1: FM1	T 550-720 MPa	C	<0,05	AA M500 is a seamless metal cored wire with remarkable stable arc and no spatters.
AA M500	Sect IX QW–432: F-No. 6	Y > 500 MPa	Mn	-1,5	Excellent for use in automated welding applications such as orbital MAG or robotic
	17632–A: T 50 6 Ni1 M M21 1 H5 A5.28:	E>24% I – 70J(-60C)	Si p s	– 0,7 <0,015 <0,015	welding. This wire offers a unique welding deposit with less than 1% nickel to fulfill NACE requirements and cover more procedures up to 500 MPa yield strength steels. AA M500 can also be used for constructions that needs post weld heat treatment after
	E80C-Ni1 H4		Ni	– 0,9	welding and still offers mechanical properties confirming 5Y46 class. Low hydrogen
	A5.36:				content HD<3 ml/100g even after long storage.
	E81T15-M21A8-Ni1-H4
CEWELD	9606–1: FM2	T 640-820 MPa	C	<0,05	AA M550 is a seamless metal cored wire with remarkable stable arc and no spatters.
AA M550	Sect IX QW–432: F-No. 6	Y > 550 MPa	Mn	-1,5	Excellent for use in automated welding applications such as orbital MAG or robotic
	18276–A: T 55 6 Mn2,5Ni M M21 1 H5 A5.36:	E>24% I -70J(-60°C)	Si p s	– 0,7 <0,015 <0,015	welding. This wire offers a unique welding deposit with more than 2% nickel to offer reliable impact properties down to –60°C. Ceweld AA M550 is used for welding 550 MPa yield strength steels. Low hydrogen content HD<3 ml/100g even after long
	E91T15-M21A8-K7-H4		Ni	– 2,2	unconditioned storage.
CEWELD	9606–1: FM2	T 640-820 MPa	C	<0,05	AA M550SR is a seamless metal cored wire with remarkable stable arc and no
AA M550 SR	Sect IX QW–432: F-No. 6	Y > 550 MPa	Mn	-1,3	spatters. Excellent for use in automated welding applications such as orbital MAG or
	18276–A:	E-20%	Si	– 0,5	robotic welding. This wire offers a unique welding deposit with less than 1 % nickel to
	T 55 6 1 Ni Mo M M 1 H5	I -60J(-60 °C)	p	<0,015	offer reliable impact properties down to 60C. AA M550 SR is used for welding 550
	A5.28:	after PWHT	s	<0,015	MPa yield strength steels also after PWHT. Low hydrogen content <3 ml/100g even
	E90C-K3M H4	T 620-720 MPa	Ni	– 0,9	after long storage.
	A5.36:	Y > 540 MPa	Mo	<0,45
	E90C-K3M H4	E>20%
		I- 50J(-60°C)

CEWELD AA M690	9606-1: FM2 Sect IX QW–432: F-No. 6	T 770-940 MPa Y> 690 MPa	C Mn	<0,05 -1,6	AA M690 is a seamless metal cored wire with remarkable crack resistant weld metal with very low hydrogen content HD<3 ml/1 00g Therefore, suitable for the economic
	18276–A:	E> 18%	Si	– 0,4	processing of high–strength and low temperature fine grained structural steels.
	T 69 6 Mn2NiCrMo	I – 80J(-60C)	p	<0,015	Excellent welding properties for both short- and spray arc. High deposition rate and no
	M M211 H5		s	<0,015	intermediate cleaning required with very low spatter loss. Excellent wetting properties
	A5.28:		Cr	– 0,5	compare to solid wires that results in a bigger parameter range and improved duty
	E 110 C-K4M H4		Ni	– 2,2	cycle for the welder.
	A5.36:		Mo	– 0,5
	E111T15-M21A8-K4-H4
CEWELD	9606-1: FM2	T 940-1040 MPa	C	<0,05	AA M960 is a seamless metal cored wire that offers excellent re-starting properties
AA M960	Sect IX QW-432: F-No. 6	Y- 960 MPa	Mn	-1,6	even with cold wire tip. Suitable for robot applications. Applicable for both short- as
	18276–A:	E> 17%	Si	– 0,4	spray arc. Excellent gap bridging for root welding. High-efficiency type for economic
	T 89 4 Mn2NiCrMo M M21	I – 554(40C)	p	<0,01	production of high-strength fine-grain structural steels up to 1100 MPa Yield
	1 H5		s	<0,01	Strength. Stable mechanical properties up to heat input of 10 kJ/cm. Low hydrogen
	A5.28:		Cr	– 0,5	content HD<3 ml/100g even after long storage.
	-E 120 C-K4 H4		Ni	-2,6
	A5.36		Mo	– 0,6
	E131T15-M21A4-K4-H4

METAL CORED WIRE FOR CREEP RESISTANT STEEL

CEWELD AA MMo	9606–1: FM3 Sect IX QW-432: F-No. 6	T 550-690 MPa Y>470MPa	C Mn	< 0,05 -1.,3	AA MMo is a seamless metal cored wire that offers excellent re-starting properties even with cold wire tip. Suitable for robot applications. Applicable for both short- and
	17634–A:	E>24%	Si	– 0,7	spray arc. Excellent gap bridging properties for root welding. High-efficiency type
	T Mo M M211 H5	I -50J(-40°C)	p	<0,015	for economic production on Heat resistant Mo–steels up to 500 °C. Low hydrogen
	A5.28:		s	<0,015	content HD<3 ml/100g even after long storage.
	E80C-G H4		Mo	– 0,5	Typical: 15Mo3, 16Mo3, A 204 Gr. A– C,
	A5.36:				ASTM A106 gr. A-B-C.
	E81T15-M21 P4-A1-H4
CEWELD	9606–1: FM3	T 550-740 MPa	C	< 0,05	AA MCrMo1 is a seamless metal cored wire that offers excellent re-starting proper-
AA M CrMot	Sect IX QW-432: F-No. 6	Y>470MPa	Mn	-1,4	ties even with cold wire tip. Suitable for robot applications. Applicable for both short-
	17634–A:	E>20%	Si	-0.,3	and spray arc. Excellent gap bridging properties for root welding. High-efficiency type
	T CrMo1 M M21 1 H5	I -50J(-40°C)	p	<0,015	for economic production of CrMo-steels up to 550 °C. Low hydrogen content HD<3
	A5.28:		s	<0,015	ml/1 00g even after long unconditioned storage.
	E 80C-B2 H4		Cr	– 1,1	Typical: 13CrMo44, 13CrMo4–5, A 387 Gr. 11–12, 24CrMo5, GS 17CrMo55,
	A5.36:		Mo	– 0,5	GS 22CrMo54,G 17CrMo5–5, G22CrMo5–4
	E81T15-M21 P4-B2-H4

CEWELD	9606–1: FM1	T 550-680 MPa	C	– 0,05	AA M Corten is a seamless metal cored wire with remarkable stable arc and no
AA M Corten	Sect IX QW-432: F-No. 6	Y>470MPa	Mn	-1,2	spatters. Excellent for use in automated welding applications such as orbital MAG or
	17632–A:	E>22%	Si	– 0,7	robotic welding. This wire offers a unique welding deposit with ± 0,7% Ni and 0,5% Cu.
T46 5 Z M M21 1 H5 I -70J(-50°C) p <0,01 Low hydrogen content HD<3 ml/100g even after long unconditioned storage.
A5.28:			s	<0,01	Typical: S235JRW–S460JRW, WTSt 37, WTSt 52, Corten A, B, C, Patinax 37, RBH
EBO C-W2-H4			Cr	– 0,5	35, Acor 37, Acor 50, HSB 51, HSB 55 C, 1.8962, 1.8963, 1.8965, 1.8960
A5.36:			Ni	– 0,7
E81T15-M21A4-W2-H4			Cu	– 0,5
4. RUTILE FLUXCORED WIRE FOR NON-ALLOYED AND FINE GRAIN STEEL
CEWELD	9606–1: FM1	T 500-640 MPa	C	< 0,08	AA R400 is a seamless rutile flux cored wire with remarkable stable arc and no
AA R400	Sect IX QW-432: F-No. 6	Y-460 MPa	Mn	-1.,3	spatters. Excellent weld puddle manipulation with fast freezing slag, superior out-
	17632–A:	E>22%	Si	– 0,5	of-position welding also at higher current, recommended for shipbuilding. Particularly
	T42 4 P M211 H5	I -50J(-40°C)	p	<0,015	suited for all-position welding on ceramic backing. Extreme low spatter loss, easy slag
	A5.20:		s	<0,015	removal. Low hydrogen content HD<3 ml/1 00g even after long storage.
	E 71T-1M -J H4
	A5.36:
	E 71T1-M21 A4-H4
CEWELD	9606–1: FM1	M21	C	< 0,08	AA R460 is a seamless rutile flux cored wire with remarkable stable arc and no
AA R460	Sect IX QW-432: F-No. 6	T 530-680 MPa	Mn	-1.,3	spatters. Excellent weld puddle manipulation with fast freezing slag, superior out-of-po-
	17632–A:	Y-480 MPa	Si	– 0,5	sition welding also at higher current. Using temperature down to -40 °C. Particularly
	T46 4 P M211 H5	E>22%	p	<0,015	suited for MAG–orbital welding(< 355MPa) and all–position welding on ceramic
	T46 2 PC11 H5	I- 70J(-40·C)	s	<0,015	backing. Extreme low spatter loss, easy slag removal. Low hydrogen content HD<3
	A5.20:	CO2			ml/1 00g even after long storage.
	E71T-1 M /1 C-J H4	T 500-640 MPa
	A5.36:	Y > 420 MPa
	E71T1-M21 A4-CS1-H4	E>22%
	E71T1-C-AO-CS 1-H4	I -70J(-20 C)
CEWELD	9606–1: FM1	M21	C	< 0,08	AA R460 LT is a seamless rutile flux cored wire with remarkable stable arc and
AA R460 LT	Sect IX QW-432: F-No. 6	T 530-680 MPa	Mn	-1.,3	no spatters. Excellent weld puddle manipulation with fast freezing slag, superior
	17632–A:	Y-460 MPa	Si	– 0,5	out-of–position welding also at higher currents. Using temperature down to -60 °C
	T46 6 P M211 H5	E>22%	p	<0,015	. Particularly suited for MAG–orbital welding (< 355MPa) and all-position welding on
	T464 PC11 H5	I -70J(-60°C)	s	<0,015	ceramic backing. Extreme low spatter loss, easy slag removal. Low hydrogen content
	A5.20:	CO2	Ni	<0,5	HD<3 ml/1 00g even after long storage.
	E71T-1 M /1 C-J H4	T 530-680 MPa
	A5.36:	Y > 460 MPa
	E71T1-M21 A8-CS1-H4	E>22%
	E71T1-C-AO-CS 1-H4	I -70J (-40 °C)
CEWELD	9606–1: FM1	M21	C	< 0,08	AA R500 is a seamless rutile flux cored wire that offers excellent modelling ability,
AA R500	Sect IX QW-432: F-No. 6	T 560-720 MPa	Mn	-1,4	therefore excellently suitable for positional welding at high currents. The weld deposit
	17632–A:	Y > 500 MPa	Si	– 0,5	shows reliable impact properties down to –60C. Particularly suitable for MAG–orbital
	T 50 6 1Ni P M21 1H5	E>22%	p	<0,015	welding(< 420MPa) and for welding on ceramics in all positions. Low spatter losses,
	T46 4 1Ni P C1 1 H5	I- 70J(-60″C)	s	<0,015	easily removable slag. CTOD tested at -20 °C. Extreme low spatter loss, easy slag
	A5.29:	CO2	Ni	– 0,9	removal. Low hydrogen content HD<3 ml/1 00g even after long storage.
	E81T1-Ni1M-J H4	T 530-680 MPa
	A5.36:	Y > 460 MPa
	E81T1-M21A8-Ni1-H4	E>22%

51	CEWELD 4370 HLS	3581-A: E 18 8 Mn R 53	A 5.4: E 307-26	FM5	F-No. 1	1/11
52	CEWELD Croni 29/9 S	3581-A: E 29 9 R 12	A5.4:E312-16	FM5	F-No. 5	1/11
53	CEWELD Croni 29/9 HLS	3581-A E 29 9 R 53	A5.4:E312-16	FM5	F-No. 5	1/11
54	CEWELD Cronimo Ti	3581-A:E 20 10 3 RB 32	A 5.4: E 308Mo-16	FM5	F-No. 5	1/11
55	CEWELD Cronimo HLS	3581-A:E 20 10 3 RB 53	A 5.4: E 308Mo-26	FM5	F-No. 1	1/11
56	CEWELD E NiTi3	14172: E Ni 2061 (NiTi3)	A5.11: E Ni-1	FM6	F-No. 41	1/12
57	CEWELD E NiCu30Mn	14172: E Ni 4060 (NiCu30Mn3Ti)	A5.11: E NiCu-7	FM6	F-No. 42	1/12
58	CEWELD E NiCro HLS	14172: -E Ni 6082 (NiCr20Mn3Nb)	A 5.11: -E NiCrFe-3	FM6	F-No. (-43)	1/12
59	CEWELD E NiCro A	14172: E Ni 6133 (NiCr16Fe12NbMo)	A 5.11: E NiCrFe-2	FM6	F-No. 43	1/12
60	CEWELD E NiCro 600	14172: E Ni 6182 (NiCr15Fe6Mn)	A 5.11: E NiCrFe-3	FM6	F-No. 43	1/12
61	CEWELD E NiCro 825	14172: E Ni 8165 (NiCr25Fe30Mo)	A5.11:-	FM6	F-No.•	1/12
62	CEWELD E NiCrMo 622	14172 E Ni 6022 (NiCr21Mo13W3)	A5.11: E NiCrMo-10	FM6	F-No. 43	1/12
63	CEWELD E Alloy C-276	14172 E Ni 6276 (NiCr15Mo15Fe6W4)	A 5.11: E NiCrMo-4	FM6	F-No. 43	1/13
64	CEWELD E Alloy B3	14172 E Ni 1067 (NiMo30Cr)	A5.11: E NiMo-10	FM6	F-No. 43	1/13
65	CEWELD E Alloy HX	14172: E Ni 6002 (NiCr22Fe18Mo)	A5.11: E NiCrMo-2	FM6	F-No. 43	1/13
66	CEWELD E NiCro 625 HLS	14172 E Ni 6625 (NiCr22Mo9Nb)	A5.11: E NiCrMo-3	FM6	F-No. 43	1/13
67	CEWELD E NiCro 625	14172 E Ni 6625 (NiCr22Mo9Nb)	A5.11: E NiCrMo-3	FM6	F-No. 43	1/13
68	CEWELD E NiCrMo 686 CPT	14172: E Ni 6686 (NiCr21Mo16W4)	A5.11: E NiCrMo-14	FM6	F-No. 43	1/13
69	CEWELD E NiCrCo 617	14172: E Ni 6117 (NiCr22Co12Mo)	A5.11: E NiCrCoMo-1	FM6	F-No. 43	1/13
70	CEWELD E DUR 300 Kb	14700: E Fe1 (DIN 8555 E 1-UM-300-P)				1/14
71	CEWELD E DUR 350 Kb	14700: E Fe1 (DIN 8555 E 1-UM-400-P)				1/14
72	CEWELD E DUR 400 Kb	14700 E Fe3 (DIN 8555 E 3-UM-400-P)				1/14
73	CEWELD E DUR 400 CrMo	14700 E Fe3 (DIN 8555 E 3-UM-40-PT)				1/14
74	CEWELD E DUR 600 Kb	14700 E Fe8 (DIN 8555 E 6-UM-60)				1/14
75	CEWELD E DUR 600 AC	14700 E Fe8 (DIN 8555 E6-UM-60-GP)				1/14
76	CEWELD E DUR 55	14700: E Fe? (DIN 8555 E3-UM-50-CKRTZ)	A5.13: E FeCr-A1		F-No. 71	1/14
77	CEWELD E DUR 60	14700: E Fe14 (DIN 8555:E10-UM-60)	A5.13: -E FeCr-A1A		F-No. 71	1/15
78	CEWELD E DUR 60 Kb	14700 E Fe8 (DIN 8555 E6-UM-60)	A5.13: -E Fe3		F-No. 71	1/15
79	CEWELD E DUR 62 S	14700 E Fe15 (DIN 8555 E 10-UM-65-GRZ)	A5.13: -E FeCr-A8		F-No. 71	1/15
80	CEWELD E DUR 63 Nb	14700 E Fe15 (DIN 8555: E 10-UM-65-GRZ)	A5.13: -E FeCr-E4		F-No. 71	1/15
81	CEWELD E DUR CE-Tube 62	14700: -E Fe15 (DIN 8555: E 10-UM-60-GZ)	A5.13: -E FeCr-A7		F-No. 71	1/15
82	CEWELD E DUR 64	14700 E Fe16 (DIN 8555: E 10-UM-65-GTZ)	A5.13: E FeCr-E4		F-No. 71	1/15
83	CEWELD E DUR 68 T	14700: -E Fe14 (DIN 8555: E 10-UM-70-GTRZ)	A5.13: -E FeCr-A8		F-No. 71	1/15
14. FOR FERRITIC & MARTENSITIC STAINLESS STEEL

E CEWELD 4015 HL-Kb		3581-A E 17 B 42	A 5 4: E 430-26
15. STELLITE ( COBALT BASED ALLOYS)
86	CEWELD E DUR 1 U	14700: E Co3 (DIN 8555 E 20-UM-55-CTZ)	A 5.13: E CoCr-C		F-No. 71	1/16
87	CEWELD E DUR 6U	14700: E Co2 (DIN 8555 E 20-UM-40-CTZ)	A 5.13: E CoCr-A		F-No. 71	1/16
88	CEWELD E DUR 12U	14700 E Co3 (DIN 8555 E20-UM-50-CSTZ)	A 5.13: E CoCr-B		F-No. 71	1/16
89	CEWELD E DUR 21 U	14700 E Co1 (DIN 8555 E 20-UM-350-CTZ)	A 5.13: E CoCr-E		F-No. 71	1/16
90	CEWELD E DUR 25U	14700: -E Co1 (DIN 8555 E 20-UM-300-CTZ)	A5.13:•			1/16
16. FOR CUTTING EDGES – TOOL STEEL E CEWELD E DUR SS 60T 14700: E Fe4 (DIN 8555: E4-UM-60-ST) A5.13: -E Fe6

CEWELD AA M 410 NiMo	ISO 17633: T13 4/T410NiMo A5.22: E 410 NiMoT0-4	T> 750 MPa Y > 500 MPa E> 15% I- 65/(-20°C)		C Mn Si Cr	< 0,06 < 1,5 <1,0 11-14,5	MM 410NiMo is a Cr-Ni-Mo- alloyed, gas-shielded metal-cored wire electrode for cladding. The corrosion resistant deposit offers a medium hardness and is resistant against metal-metal wear and high surface pressure. He is steel mill rollers, thermos- hock resistant and suitable for Francis and Pelton turbines. Used in steam power plants
		I- 55/(-20°C)		Ni	3,0- 5,0	for its excelent resistance to cavitation and stress corrosion cracking Water and steam
				Mo	0,4-1,0	turbine parts of the same kind, thermoshock and high heat resistant. 1.4313,
		38-42 HRc		Nb		1.4002, (G)X5CrNi(Mo) 13 4, X6CrAI 13, Grade CA 6 NM.
				Cu	<0,5
CEWELD	9606–1: FM5	T > 500 MPa		C	<0,20	AA 307 is rutile flux cored wire applicable for welding stainless steel to low alloyed
AA 307	Sect IX QW-432: F-No. 6	Y > 350 MPa		Mn	4,5- 7,5	steels (dissimilar welds), buffer layers before hard facing, rails crossings, Armor
	17633–A:	E > 25%		Si	<1,2	plate, austenilic manganese steels and other difficult to weld steels.
	T188MnRM213	I- 40J(-100°C)		Cr	17-20
	A5.22:			Ni	7,0-10
	– E307 T0-4			Mo	0,3
				Cu	0,5
CEWELD	9606-1: FM5	T> 500 MPa		C	<0,20	AA 307P is a rutile flux cored wire with fast freezing slag, suitable for positional
AA 307P	Sect IX QW-432: F-No. 6	Y > 475 MPa		Mn	4,5- 7,5	welding. Applicable for stainless steel dissimilar welding and buffer layers before hard
	17633–A:	E > 25%		Si	<1,2	facing, rails crossings, Armor plate, austenitic manganese steels, exhaust systems
	T 18 8 Mn P M21/C11	I – 40(-100·C)		Cr	17-20	(type 409, 304) and difficult to weld steels such as:
	A5.22:			Ni	7,0-10	42CrMo4, C45, 42MnV7, tool steels etc.
	-E 307 11-4	180 HB		Mo	0,3
	-E 307 T1-4	Strain hardening		Cu	0,5
		400 HB
CEWELD	9606-1: FM5	T>	510 MPa	C	<0,04	AA 308L is a rutile flux cored wire for welding stainless steel types with an alloy
AA 308L	Sect IX QW-432: F-No. 6	Y >	320 MPa	Mn	<2,0	content between 16 to 21% Cr and 8 to 13 % Ni, for both stabilized and un-stabilized
	17633–A:	E>	30%	Si	<1,2	types. High weld metal quality and an attractive bead appearance.
	T 19 9 LR M21/C1 3	I –	40J(-100°C)	Cr	18-21	W.no: 1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312, 1.4371,
	A5.22:			Ni	9,0-11	1.4541, 1.4543, 1.4550, 1.4452; AISI 202,302, 304L, 304,305,321,347,304 LN
	E 308 LT0-4			Mo	0,3	ASTM A320 Grade B8C/D, 302
	E 308 LT0-1			Cu	0,5
CEWELD	9606-1: FM5	T>	510 MPa	C	<0,04	AA 308LP is a rutile flux cored wire with fast freezing slag, suitable for positional
AA 308LP	Sect IX QW-432: F-No. 6	Y >	320 MPa	Mn	<2,0	welding. Stainless steel types with an alloy content between 16 to 21% Cr and 8 to
	17633–A:	E>	30%	Si	<1,2	13 % Ni, for both stabilized and un-stabilized types. High weld metal quality and an
	T199LP M211	I –	40J(-100°C)	Cr	18-21	attractive bead appearance.
	A5.22:			Ni	9,0-11	W.no: 1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312,
	E 308 LT1-4			Mo	0,3	1.4371, 1.4541, 1.4543, 1.4550, 1.4452
	E308LT1-1			Cu	0,5
CEWELD	9606-1: FM5	T>	550 MPa	C	0,04-0,08	AA 308H is a rutile flux cored wire with high carbon content for welding stainless
AA 308H	Sect IX QW-432: F-No. 6	Y >	350 MPa	Mn	< 1,0	steel types with an alloy content between 16 to 21% Cr and 8 to 13 % Ni, for both
	17633–A:	E>	30%	Si	1,0-25	stabilized and un-stabilized types. High weld metal quality and an attractive bead
	T 19 9 HR M21 3	I –	804(20 ·C)	Cr	18-21	appearance.
	A5.22:			Ni	9,0-11	W.no: 1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312,
	E 308 HT0-4			Mo	0,3	1.4371, 1.4541, 1.4543, 1.4550, 1.4452
	E 308 HT0-1			Cu	0,5
CEWELD	9606-1: FM5	T>	510 MPa	C	<0,04	AA 309L is a rutile flux cored wire for welding dissimilar steels and 13 to 18%Cr
AA 309L	Sect IX QW-432: F-No. 6	Y >	320 MPa	Mn	<2,5	stainless steels. Also suitable for welding the first layer on low carbon steel to obtain
	17633–A:	E>	25%	Si	<1,2	a AISI 304 clad layer. Buffer layers before hard facing, dissimilar joints between ferrilic
	T2312LRM213	I –	55J(20°C)	Cr	22-25	and austenitic steels and or difficult to weld steels such as: 42CrMo4, C45, 42MnV7,
	A5.22:			Ni	11-14	tool steels, heat resistant steels etc.
	E 309 LT0-1			Mo	0,3
	E 309 LT0-4			Cu	0,5
CEWELD	9606-1: FM5	T >	510 MPa	C	<0,04	AA 309LP is a rutile flux cored wire with fast freezing slag for positional welding of
AA 309LP	Sect IX QW–432: F-No. 6	Y>	320 MPa	Mn	<2,5	dissimilar steels and 13 to 18%Cr stainless steels. Also suitable for welding the first
	17633–A:	E >	25%	Si	<1,2	layer on low carbon steel to obtain a AISI 304 clad layer. Buffer layers before hard fa-
	T2312LPM211	I-	55J(20 ·C)	Cr	22-25	cing, dissimilar joints between ferrilic and austenilic steels and or difficult to weld steels
	A5.22:			Ni	11-14	such as: 42CrMo4, C45, 42MnV7, tool steels, heat resistant steels etc.
	E309LT1-1			Mo	0,3
	E 309 LT1-4			Cu	0,5
CEWELD	9606-1: FM5	T >	550 MPa	C	< 0,08	AA 309LNb is a rutile flux cored wire for positional welding of dissimilar steels and
AA 309LNb	Sect IX QW–432: F-No. 6	Y>	350 MPa	Mn	1,5-2,5	13 to 18%Cr stainless steels.
	17633–A:	E >	25%	Si	< 1,0	Cladding mild and low alloyed steels in offshore and or chemical plants in case AISI
	TZ 23 12 LNb R M211	I-	50J (20 ·C)	Cr	22-25	347 or AISI 321 are required as clad layer.
	A5.22:			Ni	11-14
	E 309LCb T0-1			Mo	0,3
	E 309LCb T0-4			Nb+Ta•	10xC
				Cu	<0,5

CEWELD 2209 Duplex Tig	9606-1: FM5 Sect IX QW–432: F-No. 6 14343–A: W 22 9 3 NL	T> 550 MPa Y > 450 MPa E> 20% I -40J (-60 °C)	C Mn Si Cr	< 0,03 0,5-2,0 <0,9 21,5-23.5	2209 Duplex Tig is a solid wire rod for TIG, suitable for welding duplex stainless steels grades 2205 and 2304. Weld metal exhibits corrosion resistance similar to grade 904L in most applications. 2209 Duplex Tig is also suitable to weld grade 2205 or grade 2304 to mild steel.
	A 5.9:		Ni	7,5-9,5	W.no: 1.4162, 1.4462, X2CrNiMoN 22 5 3, 1.4362, X2CrNiN 23 4, 1.4463, 1.4460,
	ER 2209		Mo	2,5-35	1.4583
			N	0,08-0.2
			Cu	< 1,5
CEWELD	9606-1: FM5	T> 620 MPa	C	< 0,03	2594 Tig Super Duplex s a solid wire for TIG welding the so called Super Duplex
2594 Tig	Sect IX QW–432: F-No. 6	Y > 550 MPa	Mn	<2,5	types of stainless steels. Used for pipe work and general fabrication in the offshore oil
Super	14343–A:	E> 28%	Si	< 1,0	and gas and chemical process industries for welding SAF 2507, ASTM S32760 (ZERON
Duplex	W25 94 NL	I -55J (-40 °C)	Cr	24-27	100),S32550 and S31260. Also suitable for cladding on standard steels. 2507 grade is
	A 5.9:		Ni	8,0-10,5	characterized by excellent resistance to stress corrosion in chloride-bearing environ-
	ER 2594		Mo w	2,5-4,5 < 1,0	ments and excellent resistance to pitting and crevice corrosion. UNS S32550 :UR 52 N, Ferralium 255, UNS S32520 :UR 52 N+, UNS S32750 :SAF
			N	0,2- 0,3	2507, UR 47 N+, UNS S32760 :ZERON 100, UNS 32760, UR 76 N, SM22Cr, SAF
			Cu	< 1,5	2507, ASTM S32760 (ZERON 100), S32550 and S31260
CEWELD	9606-1: FM5	T> 510 MPa	C	< 0,025	904L Tig is used for Tig–welding materials of similar chemical composition which are
904L Tig	Sect IX QW–432: F-No. 6	Y > 320 MPa	Mn	1,0-25	used for fabrication of equipment and vessels for handling of sulfuric acid and many
	14343–A:	E> 25%	Si	<0,5	chloride containing media. This filler metal may also find applications for joining Type
	W 20 25 5 Cu L	I -55J (-40 °C)	Cr	19-21,5	317L material where improved corrosion resistance in specific media is needed. In order
	A5.9:		Ni	24,0-26,0	to reduce the tendency for fissuring and hot cracking, the low melting constituents such
	ER385		Mo	4,2-5,2	as carbon, silicon, and phosphorus are controlled to lower levels in this alloy.
			Cu	1,2-20	W.no: 1.4500, 1.4505, 1.4506, 1.4519, 1.4531, 1.4536, 1.4539, 1.4573, 1.4585, 1.4586
CEWELD	9606-1: FM5	T> 600 MPa	C	0,3-0,5	25–35Nb is solid wire for TIG welding of heat resistant stainless steel with similar
25–35Nb Tig	Sect IX QW–432: F-No. 6	Y>400 MPa	Mn	-1,7	composition and high carbon content.
	14343–A:	E>8%	Si	<1,1	W.no: 1.4852 GX40NiCrSiNb35-25Alloy HP10Cb Paralloy CR39W Lloyds T57
	WZ25 35Nb		Cr	25-27	Centralloy H101
	A5.9:		Ni	34-36
			Nb	1,2-1.5
			Ti	<0,15
CEWELD	9606-1: FM5	T> 930 MPa	C	<0,05	ER 630 s a solid wire for TIG welding , precipitation hardening stainless steel used for
ER 630 Tig	Sect IX QW–432: F-No. 6	Y > 725 MPa	Mn	0,25- 0,75	welding materials of similar chemical composition such as 17–4 and 17–7.
(17-4 PH)	14343–B:	E> 5%	Si	<0,75
	W630		Cr	16-16,75
	A5.9:		Ni	4-5
	ER630		Mo	<0,75
			Cu	3,25-4,0
			Nb	0,15-0,3
12. GMA/GTA (MIG/TIG) WIRE AND ROD FOR NICKEL BASED ALLOYS
CEWELD	9606-1: FM6	T> 650 MPa	C	<0,1	Nicro 600 filler metal is used for welding nickel-chromium-iron (lnconel 600, 601
NiCro 600	Sect IX QW–432: F-No. 43	Y>400 MPa	Mn	2,5-35	and 690) alloys to themselves, and for dissimilar welding between nickel-chromium-
	18274:	E> 35%	Fe	<3,0	iron (Monel, lnconel and lncoloy) alloys and steels or stainless steels. The applications
	S Ni 6082	I -1504(20 ·C)	Si	<0,5	include surfacing as well as clad-side welding.
CEWELD	(NiCr20Mn3Nb)	I -60J (-196 °C)	Cu	<0,5	Alloy type: lnconel 600, 2.4816, 1.4876, 2.4817, 2.4851, 1.6901, NiCr15Fe, X10Ni–
NiCro 600	A5.14:		Ni	> 67,0	CrAITi 32 20, LC-NiCr15Fe, NiCr23Fe, X3CrNiN 1810, alloy 600/B168, alloy 800 /
Tig	ER NICr-3		Ti	<0,7	800H(T), N 10665, N 06601, kiln tyre, difficult to Weld steels, cock wheel
			Cr	18,0-22.0
			Nb	2,0- 3,0
CEWELD	9606-1: FM6	T> 650 MPa	C	<0,1	Nicro 601 filler metal is used for severe applications where the exposure tempera–
NiCro 601	Sect IX QW–432: F-No. 43	E>42 %	Mn	< 1,0	ture can exceed 1150 °C Excellent resistance against corrosion and oxidation and sui•
	18274:	I -60J (20 °C)	Fe	< 20,0	table for applications when exposed to hydrogen sulfide or sulfur dioxide. The nominal
	S Ni 6601		Si	<0,5	composition (wt.-%) of filler metal of this classification is:
CEWELD	(NiCr23Fe15AI)		Cu	< 1,0	61 Ni, 23 Cr, 14 Fe, and 1.4AI.
NiCro 601	A5.14:		Ni	58,0-63,0
Tig	ER NiCrFe-11		Al	1,0-1,7
			Cr	21,0- 25,0
CEWELD	9606-1: FM6	T> 650 MPa	C	0,15-0,25	NiCro 602 filler metal is used for welding similar alloys that have to resist extreme
NiCro 602	Sect IX QW–432: F-No. 43	Y > 300 MPa	Mn	<0,5	high temperature and for cladding steels or stainless steels to obtain a high tern-
CA	18274:	E > 25 %	Fe	8,0-11,0	perature resistant surface against oxidation. Cladding against high temperature, radiant
	S Ni 6025 (NiCr25Fe10AIY)	I > 50 J (20 °C)	Si	<0,5	heater tubes, furnace rolls, muffles in bright annealing furnaces (H2 atmosphere),
	A5.14:		Cu	<0,1	rotary kilns, pipe hangers, waste gas components, hydrogen production, methanol and
CEWELD	ER NCrFe-12		Ni	> 59,0	ammonia synthesis,
NiCro 602			Al	1,8-2,4	2.4633, 2.4649, NiCr25FeAIY, Nicrofer 6025 HT, Alloy 602CA, UNS N06025
CATig			Ti	0,1-0,2
			Cr	24-26

“Baghete TIG ALSI 1.6mm” has been added to your cart. View cart

Click to enlarge

Back to products

Consumabile sudura Certilas

Cere oferta

Compare

Add to wishlist

Categories: Consumabile Mig Mag, Consumabile TIG

Description

CEWELD AA M400	9606–1: FM1 Sect IX QW–432: F-No. 6	T 500-640 MPa Y > 420 MPa	C Mn	< 0,08 -1.,3	AA M400 is a seamless metal cored wire for high productivity welding, offering excel- lent properties for both short- and spray arc range. Excellent arc re-start even with cold
	17632–A: T424 M M211 H5 A 5.18:	E>24% I -70J(-40°C)	Si p s	– 0,5 <0,015 <0,015	wire tip, particularly well-suited for robotic applications with high deposition efficiency. Excellent gap bridging during root welding. Wide range of voltage setting from 14 to 32 Volts. Excellent Impact values. CTOD tested to -20 °C. Low hydrogen content
	E 70C-6M H4				HD<3 ml/1 00g even after long storage.
	A5.36:
	E71T15-M21A8-CS1-H4
CEWELD	9606–1: FM1	T 550-680 MPa	C	< 0,05	AA M460 is a seamless metal cored wire with remarkable stable arc and no spatters.
AA M460	Sect IX QW–432: F-No. 6	Y > 460 MPa	Mn	– 1,5	Excellent for use in automated welding applications such as orbital Mag or robotic
	17632–A: T46 6 M M211 H5 A 5.18:	E>24% I -70J(-60°C)	Si p s	– 0,7 <0,015 <0,015	welding. This wire offers a unique approval class at most third parties that enables you to use only one wire to cover more procedures up to 460MPa yield strength steels. AA M460 can also be used for constructions that needs post weld heat treatment after
	E 70C-6M H4				welding and still offers mechanical properties confirming 5Y46 class. Low hydrogen
	A5.36:				content HD<3 ml/100g even after long storage. CTOD tested at –20 °C.
	E81T15-M21A8-CS1-H4
CEWELD	9606–1: FM1	T 550-720 MPa	C	<0,05	AA M500 is a seamless metal cored wire with remarkable stable arc and no spatters.
AA M500	Sect IX QW–432: F-No. 6	Y > 500 MPa	Mn	-1,5	Excellent for use in automated welding applications such as orbital MAG or robotic
	17632–A: T 50 6 Ni1 M M21 1 H5 A5.28:	E>24% I – 70J(-60C)	Si p s	– 0,7 <0,015 <0,015	welding. This wire offers a unique welding deposit with less than 1% nickel to fulfill NACE requirements and cover more procedures up to 500 MPa yield strength steels. AA M500 can also be used for constructions that needs post weld heat treatment after
	E80C-Ni1 H4		Ni	– 0,9	welding and still offers mechanical properties confirming 5Y46 class. Low hydrogen
	A5.36:				content HD<3 ml/100g even after long storage.
	E81T15-M21A8-Ni1-H4
CEWELD	9606–1: FM2	T 640-820 MPa	C	<0,05	AA M550 is a seamless metal cored wire with remarkable stable arc and no spatters.
AA M550	Sect IX QW–432: F-No. 6	Y > 550 MPa	Mn	-1,5	Excellent for use in automated welding applications such as orbital MAG or robotic
	18276–A: T 55 6 Mn2,5Ni M M21 1 H5 A5.36:	E>24% I -70J(-60°C)	Si p s	– 0,7 <0,015 <0,015	welding. This wire offers a unique welding deposit with more than 2% nickel to offer reliable impact properties down to –60°C. Ceweld AA M550 is used for welding 550 MPa yield strength steels. Low hydrogen content HD<3 ml/100g even after long
	E91T15-M21A8-K7-H4		Ni	– 2,2	unconditioned storage.
CEWELD	9606–1: FM2	T 640-820 MPa	C	<0,05	AA M550SR is a seamless metal cored wire with remarkable stable arc and no
AA M550 SR	Sect IX QW–432: F-No. 6	Y > 550 MPa	Mn	-1,3	spatters. Excellent for use in automated welding applications such as orbital MAG or
	18276–A:	E-20%	Si	– 0,5	robotic welding. This wire offers a unique welding deposit with less than 1 % nickel to
	T 55 6 1 Ni Mo M M 1 H5	I -60J(-60 °C)	p	<0,015	offer reliable impact properties down to 60C. AA M550 SR is used for welding 550
	A5.28:	after PWHT	s	<0,015	MPa yield strength steels also after PWHT. Low hydrogen content <3 ml/100g even
	E90C-K3M H4	T 620-720 MPa	Ni	– 0,9	after long storage.
	A5.36:	Y > 540 MPa	Mo	<0,45
	E90C-K3M H4	E>20%
		I- 50J(-60°C)

CEWELD AA M690	9606-1: FM2 Sect IX QW–432: F-No. 6	T 770-940 MPa Y> 690 MPa	C Mn	<0,05 -1,6	AA M690 is a seamless metal cored wire with remarkable crack resistant weld metal with very low hydrogen content HD<3 ml/1 00g Therefore, suitable for the economic
	18276–A:	E> 18%	Si	– 0,4	processing of high–strength and low temperature fine grained structural steels.
	T 69 6 Mn2NiCrMo	I – 80J(-60C)	p	<0,015	Excellent welding properties for both short- and spray arc. High deposition rate and no
	M M211 H5		s	<0,015	intermediate cleaning required with very low spatter loss. Excellent wetting properties
	A5.28:		Cr	– 0,5	compare to solid wires that results in a bigger parameter range and improved duty
	E 110 C-K4M H4		Ni	– 2,2	cycle for the welder.
	A5.36:		Mo	– 0,5
	E111T15-M21A8-K4-H4
CEWELD	9606-1: FM2	T 940-1040 MPa	C	<0,05	AA M960 is a seamless metal cored wire that offers excellent re-starting properties
AA M960	Sect IX QW-432: F-No. 6	Y- 960 MPa	Mn	-1,6	even with cold wire tip. Suitable for robot applications. Applicable for both short- as
	18276–A:	E> 17%	Si	– 0,4	spray arc. Excellent gap bridging for root welding. High-efficiency type for economic
	T 89 4 Mn2NiCrMo M M21	I – 554(40C)	p	<0,01	production of high-strength fine-grain structural steels up to 1100 MPa Yield
	1 H5		s	<0,01	Strength. Stable mechanical properties up to heat input of 10 kJ/cm. Low hydrogen
	A5.28:		Cr	– 0,5	content HD<3 ml/100g even after long storage.
	-E 120 C-K4 H4		Ni	-2,6
	A5.36		Mo	– 0,6
	E131T15-M21A4-K4-H4

CEWELD AA MMo	9606–1: FM3 Sect IX QW-432: F-No. 6	T 550-690 MPa Y>470MPa	C Mn	< 0,05 -1.,3	AA MMo is a seamless metal cored wire that offers excellent re-starting properties even with cold wire tip. Suitable for robot applications. Applicable for both short- and
	17634–A:	E>24%	Si	– 0,7	spray arc. Excellent gap bridging properties for root welding. High-efficiency type
	T Mo M M211 H5	I -50J(-40°C)	p	<0,015	for economic production on Heat resistant Mo–steels up to 500 °C. Low hydrogen
	A5.28:		s	<0,015	content HD<3 ml/100g even after long storage.
	E80C-G H4		Mo	– 0,5	Typical: 15Mo3, 16Mo3, A 204 Gr. A– C,
	A5.36:				ASTM A106 gr. A-B-C.
	E81T15-M21 P4-A1-H4
CEWELD	9606–1: FM3	T 550-740 MPa	C	< 0,05	AA MCrMo1 is a seamless metal cored wire that offers excellent re-starting proper-
AA M CrMot	Sect IX QW-432: F-No. 6	Y>470MPa	Mn	-1,4	ties even with cold wire tip. Suitable for robot applications. Applicable for both short-
	17634–A:	E>20%	Si	-0.,3	and spray arc. Excellent gap bridging properties for root welding. High-efficiency type
	T CrMo1 M M21 1 H5	I -50J(-40°C)	p	<0,015	for economic production of CrMo-steels up to 550 °C. Low hydrogen content HD<3
	A5.28:		s	<0,015	ml/1 00g even after long unconditioned storage.
	E 80C-B2 H4		Cr	– 1,1	Typical: 13CrMo44, 13CrMo4–5, A 387 Gr. 11–12, 24CrMo5, GS 17CrMo55,
	A5.36:		Mo	– 0,5	GS 22CrMo54,G 17CrMo5–5, G22CrMo5–4
	E81T15-M21 P4-B2-H4

CEWELD	9606–1: FM1	T 550-680 MPa	C	– 0,05	AA M Corten is a seamless metal cored wire with remarkable stable arc and no
AA M Corten	Sect IX QW-432: F-No. 6	Y>470MPa	Mn	-1,2	spatters. Excellent for use in automated welding applications such as orbital MAG or
	17632–A:	E>22%	Si	– 0,7	robotic welding. This wire offers a unique welding deposit with ± 0,7% Ni and 0,5% Cu.
T46 5 Z M M21 1 H5 I -70J(-50°C) p <0,01 Low hydrogen content HD<3 ml/100g even after long unconditioned storage.
A5.28:			s	<0,01	Typical: S235JRW–S460JRW, WTSt 37, WTSt 52, Corten A, B, C, Patinax 37, RBH
EBO C-W2-H4			Cr	– 0,5	35, Acor 37, Acor 50, HSB 51, HSB 55 C, 1.8962, 1.8963, 1.8965, 1.8960
A5.36:			Ni	– 0,7
E81T15-M21A4-W2-H4			Cu	– 0,5
4. RUTILE FLUXCORED WIRE FOR NON-ALLOYED AND FINE GRAIN STEEL
CEWELD	9606–1: FM1	T 500-640 MPa	C	< 0,08	AA R400 is a seamless rutile flux cored wire with remarkable stable arc and no
AA R400	Sect IX QW-432: F-No. 6	Y-460 MPa	Mn	-1.,3	spatters. Excellent weld puddle manipulation with fast freezing slag, superior out-
	17632–A:	E>22%	Si	– 0,5	of-position welding also at higher current, recommended for shipbuilding. Particularly
	T42 4 P M211 H5	I -50J(-40°C)	p	<0,015	suited for all-position welding on ceramic backing. Extreme low spatter loss, easy slag
	A5.20:		s	<0,015	removal. Low hydrogen content HD<3 ml/1 00g even after long storage.
	E 71T-1M -J H4
	A5.36:
	E 71T1-M21 A4-H4
CEWELD	9606–1: FM1	M21	C	< 0,08	AA R460 is a seamless rutile flux cored wire with remarkable stable arc and no
AA R460	Sect IX QW-432: F-No. 6	T 530-680 MPa	Mn	-1.,3	spatters. Excellent weld puddle manipulation with fast freezing slag, superior out-of-po-
	17632–A:	Y-480 MPa	Si	– 0,5	sition welding also at higher current. Using temperature down to -40 °C. Particularly
	T46 4 P M211 H5	E>22%	p	<0,015	suited for MAG–orbital welding(< 355MPa) and all–position welding on ceramic
	T46 2 PC11 H5	I- 70J(-40·C)	s	<0,015	backing. Extreme low spatter loss, easy slag removal. Low hydrogen content HD<3
	A5.20:	CO2			ml/1 00g even after long storage.
	E71T-1 M /1 C-J H4	T 500-640 MPa
	A5.36:	Y > 420 MPa
	E71T1-M21 A4-CS1-H4	E>22%
	E71T1-C-AO-CS 1-H4	I -70J(-20 C)
CEWELD	9606–1: FM1	M21	C	< 0,08	AA R460 LT is a seamless rutile flux cored wire with remarkable stable arc and
AA R460 LT	Sect IX QW-432: F-No. 6	T 530-680 MPa	Mn	-1.,3	no spatters. Excellent weld puddle manipulation with fast freezing slag, superior
	17632–A:	Y-460 MPa	Si	– 0,5	out-of–position welding also at higher currents. Using temperature down to -60 °C
	T46 6 P M211 H5	E>22%	p	<0,015	. Particularly suited for MAG–orbital welding (< 355MPa) and all-position welding on
	T464 PC11 H5	I -70J(-60°C)	s	<0,015	ceramic backing. Extreme low spatter loss, easy slag removal. Low hydrogen content
	A5.20:	CO2	Ni	<0,5	HD<3 ml/1 00g even after long storage.
	E71T-1 M /1 C-J H4	T 530-680 MPa
	A5.36:	Y > 460 MPa
	E71T1-M21 A8-CS1-H4	E>22%
	E71T1-C-AO-CS 1-H4	I -70J (-40 °C)
CEWELD	9606–1: FM1	M21	C	< 0,08	AA R500 is a seamless rutile flux cored wire that offers excellent modelling ability,
AA R500	Sect IX QW-432: F-No. 6	T 560-720 MPa	Mn	-1,4	therefore excellently suitable for positional welding at high currents. The weld deposit
	17632–A:	Y > 500 MPa	Si	– 0,5	shows reliable impact properties down to –60C. Particularly suitable for MAG–orbital
	T 50 6 1Ni P M21 1H5	E>22%	p	<0,015	welding(< 420MPa) and for welding on ceramics in all positions. Low spatter losses,
	T46 4 1Ni P C1 1 H5	I- 70J(-60″C)	s	<0,015	easily removable slag. CTOD tested at -20 °C. Extreme low spatter loss, easy slag
	A5.29:	CO2	Ni	– 0,9	removal. Low hydrogen content HD<3 ml/1 00g even after long storage.
	E81T1-Ni1M-J H4	T 530-680 MPa
	A5.36:	Y > 460 MPa
	E81T1-M21A8-Ni1-H4	E>22%

51	CEWELD 4370 HLS	3581-A: E 18 8 Mn R 53	A 5.4: E 307-26	FM5	F-No. 1	1/11
52	CEWELD Croni 29/9 S	3581-A: E 29 9 R 12	A5.4:E312-16	FM5	F-No. 5	1/11
53	CEWELD Croni 29/9 HLS	3581-A E 29 9 R 53	A5.4:E312-16	FM5	F-No. 5	1/11
54	CEWELD Cronimo Ti	3581-A:E 20 10 3 RB 32	A 5.4: E 308Mo-16	FM5	F-No. 5	1/11
55	CEWELD Cronimo HLS	3581-A:E 20 10 3 RB 53	A 5.4: E 308Mo-26	FM5	F-No. 1	1/11
56	CEWELD E NiTi3	14172: E Ni 2061 (NiTi3)	A5.11: E Ni-1	FM6	F-No. 41	1/12
57	CEWELD E NiCu30Mn	14172: E Ni 4060 (NiCu30Mn3Ti)	A5.11: E NiCu-7	FM6	F-No. 42	1/12
58	CEWELD E NiCro HLS	14172: -E Ni 6082 (NiCr20Mn3Nb)	A 5.11: -E NiCrFe-3	FM6	F-No. (-43)	1/12
59	CEWELD E NiCro A	14172: E Ni 6133 (NiCr16Fe12NbMo)	A 5.11: E NiCrFe-2	FM6	F-No. 43	1/12
60	CEWELD E NiCro 600	14172: E Ni 6182 (NiCr15Fe6Mn)	A 5.11: E NiCrFe-3	FM6	F-No. 43	1/12
61	CEWELD E NiCro 825	14172: E Ni 8165 (NiCr25Fe30Mo)	A5.11:-	FM6	F-No.•	1/12
62	CEWELD E NiCrMo 622	14172 E Ni 6022 (NiCr21Mo13W3)	A5.11: E NiCrMo-10	FM6	F-No. 43	1/12
63	CEWELD E Alloy C-276	14172 E Ni 6276 (NiCr15Mo15Fe6W4)	A 5.11: E NiCrMo-4	FM6	F-No. 43	1/13
64	CEWELD E Alloy B3	14172 E Ni 1067 (NiMo30Cr)	A5.11: E NiMo-10	FM6	F-No. 43	1/13
65	CEWELD E Alloy HX	14172: E Ni 6002 (NiCr22Fe18Mo)	A5.11: E NiCrMo-2	FM6	F-No. 43	1/13
66	CEWELD E NiCro 625 HLS	14172 E Ni 6625 (NiCr22Mo9Nb)	A5.11: E NiCrMo-3	FM6	F-No. 43	1/13
67	CEWELD E NiCro 625	14172 E Ni 6625 (NiCr22Mo9Nb)	A5.11: E NiCrMo-3	FM6	F-No. 43	1/13
68	CEWELD E NiCrMo 686 CPT	14172: E Ni 6686 (NiCr21Mo16W4)	A5.11: E NiCrMo-14	FM6	F-No. 43	1/13
69	CEWELD E NiCrCo 617	14172: E Ni 6117 (NiCr22Co12Mo)	A5.11: E NiCrCoMo-1	FM6	F-No. 43	1/13
70	CEWELD E DUR 300 Kb	14700: E Fe1 (DIN 8555 E 1-UM-300-P)				1/14
71	CEWELD E DUR 350 Kb	14700: E Fe1 (DIN 8555 E 1-UM-400-P)				1/14
72	CEWELD E DUR 400 Kb	14700 E Fe3 (DIN 8555 E 3-UM-400-P)				1/14
73	CEWELD E DUR 400 CrMo	14700 E Fe3 (DIN 8555 E 3-UM-40-PT)				1/14
74	CEWELD E DUR 600 Kb	14700 E Fe8 (DIN 8555 E 6-UM-60)				1/14
75	CEWELD E DUR 600 AC	14700 E Fe8 (DIN 8555 E6-UM-60-GP)				1/14
76	CEWELD E DUR 55	14700: E Fe? (DIN 8555 E3-UM-50-CKRTZ)	A5.13: E FeCr-A1		F-No. 71	1/14
77	CEWELD E DUR 60	14700: E Fe14 (DIN 8555:E10-UM-60)	A5.13: -E FeCr-A1A		F-No. 71	1/15
78	CEWELD E DUR 60 Kb	14700 E Fe8 (DIN 8555 E6-UM-60)	A5.13: -E Fe3		F-No. 71	1/15
79	CEWELD E DUR 62 S	14700 E Fe15 (DIN 8555 E 10-UM-65-GRZ)	A5.13: -E FeCr-A8		F-No. 71	1/15
80	CEWELD E DUR 63 Nb	14700 E Fe15 (DIN 8555: E 10-UM-65-GRZ)	A5.13: -E FeCr-E4		F-No. 71	1/15
81	CEWELD E DUR CE-Tube 62	14700: -E Fe15 (DIN 8555: E 10-UM-60-GZ)	A5.13: -E FeCr-A7		F-No. 71	1/15
82	CEWELD E DUR 64	14700 E Fe16 (DIN 8555: E 10-UM-65-GTZ)	A5.13: E FeCr-E4		F-No. 71	1/15
83	CEWELD E DUR 68 T	14700: -E Fe14 (DIN 8555: E 10-UM-70-GTRZ)	A5.13: -E FeCr-A8		F-No. 71	1/15
14. FOR FERRITIC & MARTENSITIC STAINLESS STEEL

E CEWELD 4015 HL-Kb		3581-A E 17 B 42	A 5 4: E 430-26
15. STELLITE ( COBALT BASED ALLOYS)
86	CEWELD E DUR 1 U	14700: E Co3 (DIN 8555 E 20-UM-55-CTZ)	A 5.13: E CoCr-C		F-No. 71	1/16
87	CEWELD E DUR 6U	14700: E Co2 (DIN 8555 E 20-UM-40-CTZ)	A 5.13: E CoCr-A		F-No. 71	1/16
88	CEWELD E DUR 12U	14700 E Co3 (DIN 8555 E20-UM-50-CSTZ)	A 5.13: E CoCr-B		F-No. 71	1/16
89	CEWELD E DUR 21 U	14700 E Co1 (DIN 8555 E 20-UM-350-CTZ)	A 5.13: E CoCr-E		F-No. 71	1/16
90	CEWELD E DUR 25U	14700: -E Co1 (DIN 8555 E 20-UM-300-CTZ)	A5.13:•			1/16
16. FOR CUTTING EDGES – TOOL STEEL E CEWELD E DUR SS 60T 14700: E Fe4 (DIN 8555: E4-UM-60-ST) A5.13: -E Fe6

CEWELD AA M 410 NiMo	ISO 17633: T13 4/T410NiMo A5.22: E 410 NiMoT0-4	T> 750 MPa Y > 500 MPa E> 15% I- 65/(-20°C)		C Mn Si Cr	< 0,06 < 1,5 <1,0 11-14,5	MM 410NiMo is a Cr-Ni-Mo- alloyed, gas-shielded metal-cored wire electrode for cladding. The corrosion resistant deposit offers a medium hardness and is resistant against metal-metal wear and high surface pressure. He is steel mill rollers, thermos- hock resistant and suitable for Francis and Pelton turbines. Used in steam power plants
		I- 55/(-20°C)		Ni	3,0- 5,0	for its excelent resistance to cavitation and stress corrosion cracking Water and steam
				Mo	0,4-1,0	turbine parts of the same kind, thermoshock and high heat resistant. 1.4313,
		38-42 HRc		Nb		1.4002, (G)X5CrNi(Mo) 13 4, X6CrAI 13, Grade CA 6 NM.
				Cu	<0,5
CEWELD	9606–1: FM5	T > 500 MPa		C	<0,20	AA 307 is rutile flux cored wire applicable for welding stainless steel to low alloyed
AA 307	Sect IX QW-432: F-No. 6	Y > 350 MPa		Mn	4,5- 7,5	steels (dissimilar welds), buffer layers before hard facing, rails crossings, Armor
	17633–A:	E > 25%		Si	<1,2	plate, austenilic manganese steels and other difficult to weld steels.
	T188MnRM213	I- 40J(-100°C)		Cr	17-20
	A5.22:			Ni	7,0-10
	– E307 T0-4			Mo	0,3
				Cu	0,5
CEWELD	9606-1: FM5	T> 500 MPa		C	<0,20	AA 307P is a rutile flux cored wire with fast freezing slag, suitable for positional
AA 307P	Sect IX QW-432: F-No. 6	Y > 475 MPa		Mn	4,5- 7,5	welding. Applicable for stainless steel dissimilar welding and buffer layers before hard
	17633–A:	E > 25%		Si	<1,2	facing, rails crossings, Armor plate, austenitic manganese steels, exhaust systems
	T 18 8 Mn P M21/C11	I – 40(-100·C)		Cr	17-20	(type 409, 304) and difficult to weld steels such as:
	A5.22:			Ni	7,0-10	42CrMo4, C45, 42MnV7, tool steels etc.
	-E 307 11-4	180 HB		Mo	0,3
	-E 307 T1-4	Strain hardening		Cu	0,5
		400 HB
CEWELD	9606-1: FM5	T>	510 MPa	C	<0,04	AA 308L is a rutile flux cored wire for welding stainless steel types with an alloy
AA 308L	Sect IX QW-432: F-No. 6	Y >	320 MPa	Mn	<2,0	content between 16 to 21% Cr and 8 to 13 % Ni, for both stabilized and un-stabilized
	17633–A:	E>	30%	Si	<1,2	types. High weld metal quality and an attractive bead appearance.
	T 19 9 LR M21/C1 3	I –	40J(-100°C)	Cr	18-21	W.no: 1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312, 1.4371,
	A5.22:			Ni	9,0-11	1.4541, 1.4543, 1.4550, 1.4452; AISI 202,302, 304L, 304,305,321,347,304 LN
	E 308 LT0-4			Mo	0,3	ASTM A320 Grade B8C/D, 302
	E 308 LT0-1			Cu	0,5
CEWELD	9606-1: FM5	T>	510 MPa	C	<0,04	AA 308LP is a rutile flux cored wire with fast freezing slag, suitable for positional
AA 308LP	Sect IX QW-432: F-No. 6	Y >	320 MPa	Mn	<2,0	welding. Stainless steel types with an alloy content between 16 to 21% Cr and 8 to
	17633–A:	E>	30%	Si	<1,2	13 % Ni, for both stabilized and un-stabilized types. High weld metal quality and an
	T199LP M211	I –	40J(-100°C)	Cr	18-21	attractive bead appearance.
	A5.22:			Ni	9,0-11	W.no: 1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312,
	E 308 LT1-4			Mo	0,3	1.4371, 1.4541, 1.4543, 1.4550, 1.4452
	E308LT1-1			Cu	0,5
CEWELD	9606-1: FM5	T>	550 MPa	C	0,04-0,08	AA 308H is a rutile flux cored wire with high carbon content for welding stainless
AA 308H	Sect IX QW-432: F-No. 6	Y >	350 MPa	Mn	< 1,0	steel types with an alloy content between 16 to 21% Cr and 8 to 13 % Ni, for both
	17633–A:	E>	30%	Si	1,0-25	stabilized and un-stabilized types. High weld metal quality and an attractive bead
	T 19 9 HR M21 3	I –	804(20 ·C)	Cr	18-21	appearance.
	A5.22:			Ni	9,0-11	W.no: 1.4306, 1.4301, 1.4541, 1.4550, 1.4311, 1.4546, 1.4312, 1.4300, 1.4312,
	E 308 HT0-4			Mo	0,3	1.4371, 1.4541, 1.4543, 1.4550, 1.4452
	E 308 HT0-1			Cu	0,5
CEWELD	9606-1: FM5	T>	510 MPa	C	<0,04	AA 309L is a rutile flux cored wire for welding dissimilar steels and 13 to 18%Cr
AA 309L	Sect IX QW-432: F-No. 6	Y >	320 MPa	Mn	<2,5	stainless steels. Also suitable for welding the first layer on low carbon steel to obtain
	17633–A:	E>	25%	Si	<1,2	a AISI 304 clad layer. Buffer layers before hard facing, dissimilar joints between ferrilic
	T2312LRM213	I –	55J(20°C)	Cr	22-25	and austenitic steels and or difficult to weld steels such as: 42CrMo4, C45, 42MnV7,
	A5.22:			Ni	11-14	tool steels, heat resistant steels etc.
	E 309 LT0-1			Mo	0,3
	E 309 LT0-4			Cu	0,5
CEWELD	9606-1: FM5	T >	510 MPa	C	<0,04	AA 309LP is a rutile flux cored wire with fast freezing slag for positional welding of
AA 309LP	Sect IX QW–432: F-No. 6	Y>	320 MPa	Mn	<2,5	dissimilar steels and 13 to 18%Cr stainless steels. Also suitable for welding the first
	17633–A:	E >	25%	Si	<1,2	layer on low carbon steel to obtain a AISI 304 clad layer. Buffer layers before hard fa-
	T2312LPM211	I-	55J(20 ·C)	Cr	22-25	cing, dissimilar joints between ferrilic and austenilic steels and or difficult to weld steels
	A5.22:			Ni	11-14	such as: 42CrMo4, C45, 42MnV7, tool steels, heat resistant steels etc.
	E309LT1-1			Mo	0,3
	E 309 LT1-4			Cu	0,5
CEWELD	9606-1: FM5	T >	550 MPa	C	< 0,08	AA 309LNb is a rutile flux cored wire for positional welding of dissimilar steels and
AA 309LNb	Sect IX QW–432: F-No. 6	Y>	350 MPa	Mn	1,5-2,5	13 to 18%Cr stainless steels.
	17633–A:	E >	25%	Si	< 1,0	Cladding mild and low alloyed steels in offshore and or chemical plants in case AISI
	TZ 23 12 LNb R M211	I-	50J (20 ·C)	Cr	22-25	347 or AISI 321 are required as clad layer.
	A5.22:			Ni	11-14
	E 309LCb T0-1			Mo	0,3
	E 309LCb T0-4			Nb+Ta•	10xC
				Cu	<0,5

CEWELD 2209 Duplex Tig	9606-1: FM5 Sect IX QW–432: F-No. 6 14343–A: W 22 9 3 NL	T> 550 MPa Y > 450 MPa E> 20% I -40J (-60 °C)	C Mn Si Cr	< 0,03 0,5-2,0 <0,9 21,5-23.5	2209 Duplex Tig is a solid wire rod for TIG, suitable for welding duplex stainless steels grades 2205 and 2304. Weld metal exhibits corrosion resistance similar to grade 904L in most applications. 2209 Duplex Tig is also suitable to weld grade 2205 or grade 2304 to mild steel.
	A 5.9:		Ni	7,5-9,5	W.no: 1.4162, 1.4462, X2CrNiMoN 22 5 3, 1.4362, X2CrNiN 23 4, 1.4463, 1.4460,
	ER 2209		Mo	2,5-35	1.4583
			N	0,08-0.2
			Cu	< 1,5
CEWELD	9606-1: FM5	T> 620 MPa	C	< 0,03	2594 Tig Super Duplex s a solid wire for TIG welding the so called Super Duplex
2594 Tig	Sect IX QW–432: F-No. 6	Y > 550 MPa	Mn	<2,5	types of stainless steels. Used for pipe work and general fabrication in the offshore oil
Super	14343–A:	E> 28%	Si	< 1,0	and gas and chemical process industries for welding SAF 2507, ASTM S32760 (ZERON
Duplex	W25 94 NL	I -55J (-40 °C)	Cr	24-27	100),S32550 and S31260. Also suitable for cladding on standard steels. 2507 grade is
	A 5.9:		Ni	8,0-10,5	characterized by excellent resistance to stress corrosion in chloride-bearing environ-
	ER 2594		Mo w	2,5-4,5 < 1,0	ments and excellent resistance to pitting and crevice corrosion. UNS S32550 :UR 52 N, Ferralium 255, UNS S32520 :UR 52 N+, UNS S32750 :SAF
			N	0,2- 0,3	2507, UR 47 N+, UNS S32760 :ZERON 100, UNS 32760, UR 76 N, SM22Cr, SAF
			Cu	< 1,5	2507, ASTM S32760 (ZERON 100), S32550 and S31260
CEWELD	9606-1: FM5	T> 510 MPa	C	< 0,025	904L Tig is used for Tig–welding materials of similar chemical composition which are
904L Tig	Sect IX QW–432: F-No. 6	Y > 320 MPa	Mn	1,0-25	used for fabrication of equipment and vessels for handling of sulfuric acid and many
	14343–A:	E> 25%	Si	<0,5	chloride containing media. This filler metal may also find applications for joining Type
	W 20 25 5 Cu L	I -55J (-40 °C)	Cr	19-21,5	317L material where improved corrosion resistance in specific media is needed. In order
	A5.9:		Ni	24,0-26,0	to reduce the tendency for fissuring and hot cracking, the low melting constituents such
	ER385		Mo	4,2-5,2	as carbon, silicon, and phosphorus are controlled to lower levels in this alloy.
			Cu	1,2-20	W.no: 1.4500, 1.4505, 1.4506, 1.4519, 1.4531, 1.4536, 1.4539, 1.4573, 1.4585, 1.4586
CEWELD	9606-1: FM5	T> 600 MPa	C	0,3-0,5	25–35Nb is solid wire for TIG welding of heat resistant stainless steel with similar
25–35Nb Tig	Sect IX QW–432: F-No. 6	Y>400 MPa	Mn	-1,7	composition and high carbon content.
	14343–A:	E>8%	Si	<1,1	W.no: 1.4852 GX40NiCrSiNb35-25Alloy HP10Cb Paralloy CR39W Lloyds T57
	WZ25 35Nb		Cr	25-27	Centralloy H101
	A5.9:		Ni	34-36
			Nb	1,2-1.5
			Ti	<0,15
CEWELD	9606-1: FM5	T> 930 MPa	C	<0,05	ER 630 s a solid wire for TIG welding , precipitation hardening stainless steel used for
ER 630 Tig	Sect IX QW–432: F-No. 6	Y > 725 MPa	Mn	0,25- 0,75	welding materials of similar chemical composition such as 17–4 and 17–7.
(17-4 PH)	14343–B:	E> 5%	Si	<0,75
	W630		Cr	16-16,75
	A5.9:		Ni	4-5
	ER630		Mo	<0,75
			Cu	3,25-4,0
			Nb	0,15-0,3
12. GMA/GTA (MIG/TIG) WIRE AND ROD FOR NICKEL BASED ALLOYS
CEWELD	9606-1: FM6	T> 650 MPa	C	<0,1	Nicro 600 filler metal is used for welding nickel-chromium-iron (lnconel 600, 601
NiCro 600	Sect IX QW–432: F-No. 43	Y>400 MPa	Mn	2,5-35	and 690) alloys to themselves, and for dissimilar welding between nickel-chromium-
	18274:	E> 35%	Fe	<3,0	iron (Monel, lnconel and lncoloy) alloys and steels or stainless steels. The applications
	S Ni 6082	I -1504(20 ·C)	Si	<0,5	include surfacing as well as clad-side welding.
CEWELD	(NiCr20Mn3Nb)	I -60J (-196 °C)	Cu	<0,5	Alloy type: lnconel 600, 2.4816, 1.4876, 2.4817, 2.4851, 1.6901, NiCr15Fe, X10Ni–
NiCro 600	A5.14:		Ni	> 67,0	CrAITi 32 20, LC-NiCr15Fe, NiCr23Fe, X3CrNiN 1810, alloy 600/B168, alloy 800 /
Tig	ER NICr-3		Ti	<0,7	800H(T), N 10665, N 06601, kiln tyre, difficult to Weld steels, cock wheel
			Cr	18,0-22.0
			Nb	2,0- 3,0
CEWELD	9606-1: FM6	T> 650 MPa	C	<0,1	Nicro 601 filler metal is used for severe applications where the exposure tempera–
NiCro 601	Sect IX QW–432: F-No. 43	E>42 %	Mn	< 1,0	ture can exceed 1150 °C Excellent resistance against corrosion and oxidation and sui•
	18274:	I -60J (20 °C)	Fe	< 20,0	table for applications when exposed to hydrogen sulfide or sulfur dioxide. The nominal
	S Ni 6601		Si	<0,5	composition (wt.-%) of filler metal of this classification is:
CEWELD	(NiCr23Fe15AI)		Cu	< 1,0	61 Ni, 23 Cr, 14 Fe, and 1.4AI.
NiCro 601	A5.14:		Ni	58,0-63,0
Tig	ER NiCrFe-11		Al	1,0-1,7
			Cr	21,0- 25,0
CEWELD	9606-1: FM6	T> 650 MPa	C	0,15-0,25	NiCro 602 filler metal is used for welding similar alloys that have to resist extreme
NiCro 602	Sect IX QW–432: F-No. 43	Y > 300 MPa	Mn	<0,5	high temperature and for cladding steels or stainless steels to obtain a high tern-
CA	18274:	E > 25 %	Fe	8,0-11,0	perature resistant surface against oxidation. Cladding against high temperature, radiant
	S Ni 6025 (NiCr25Fe10AIY)	I > 50 J (20 °C)	Si	<0,5	heater tubes, furnace rolls, muffles in bright annealing furnaces (H2 atmosphere),
	A5.14:		Cu	<0,1	rotary kilns, pipe hangers, waste gas components, hydrogen production, methanol and
CEWELD	ER NCrFe-12		Ni	> 59,0	ammonia synthesis,
NiCro 602			Al	1,8-2,4	2.4633, 2.4649, NiCr25FeAIY, Nicrofer 6025 HT, Alloy 602CA, UNS N06025
CATig			Ti	0,1-0,2
			Cr	24-26

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Consumabile sudura Certilas”

Specificatii

catalog produse

Download

Livrare si plata

Livrare produse

Produsele se vor livra si plati utilizind modalitatea aleasa de dvs. la efectuarea comenzii. Produsele se afla in ambalajul original al producatorului si sunt absolut noi.

Termenul de livrare al produselor cumparate de pe site-ul nostru se confirma de catre un operator Detop Online Srl, dupa plasarea comenzii. Comanda poate sa fie anulata daca termenul nu este acceptabil. In conditii speciale Detop.ro isi asuma dreptul de a mari timpul de livrare anuntind clientul despre aceasta.

Tarife FanCurier

Colete: 15 lei pentru primul kg /destinatie.
1.2 lei/pentru fiecare kg suplimentar.
1.20 lei/pentru fiecare km efectuat in cazul expeditiilor in afara retelei FAN COURIER EXPRESS intr-un sens
ramburs : 5 lei